2015 complete drivers pack download windows 7

Drivers & software

HP Service Pack for ProLiant

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

HP Service Pack for ProLiant (SPP) is a comprehensive systems software and firmware update solution, which is delivered as a single ISO image. This solution uses HP Smart Update Manager (HP SUM) as the deployment tool and is tested on all HP ProLiant Gen9, Gen8 and earlier servers as defined in the Service Pack for ProLiant Server Support Guide found at www.hp.com/go/spp/documentation.

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Included in this release:

  • Support for new options
  • HP Smart Update Manager v7.4.0

The SPP will not fit on standard DVD media.  See the HP Service Pack for ProLiant Release Notes for more information.

See the HP Service Pack for ProLiant Server Support Guide for information on supported HP servers.

Prerequisites:
For prerequisite information, please see the HP Service Pack for ProLiant Release Notes.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

573f8cc7d480479e263e5ee296314e7544ab1cd6953c8802ef31b67f519407c0SPP2015100.2015_0921.6.iso
f971fb44dab9c3c984e923c04202aba8b685f462ca8f89a05b046a52cebec51cSPP2015100.2015_0921.6.iso.md5sum

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.

Installation:

README replaces Start in online and offline modes.

Users familiar with using Start on the previous SPP iso will notice that it has been replaced with a new file, README. README.html will present locations for finding more information on the web and the basics of how to use the SPP in multiple languages.  End User License Agreements (EULA) are available in the EULA folder for viewing.

Installation instructions

There are two methods for using the Service Pack for ProLiant to update your ProLiant servers:

-    Online mode - Runs on a Windows or Linux hosted operating system
-    Offline mode - Server is booted to the ISO

  • Automatic mode - Firmware components will be updated without interaction

  • Interactive mode - Follow the onscreen steps to update firmware components

     To initiate deployment in Interactive mode:

    Run the launch_hpsum.bat (Windows) or launch_hpsum.sh (Linux) script, which is found in the root of the ISO.

    Automatic mode will by default run firmware update without any user interaction after sitting 30 seconds at the menu screen when an SPP ISO image is used to boot the server.

    Booting the SPP from iLO virtual media is only supported in Automatic Firmware Update mode. Users attempting this in any other mode may experience hangs from connection timeouts, difficulties updating iLO firmware, and mouse syncing issues.

    Note: If you install a software from the SPP and then install a Microsoft Windows operating system Service Pack or other operating system updates, HP recommends reinstalling the software from the SPP.

    Click here for theHP Service Pack for ProLiant Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement
BSD License
gSOAP Software End User License Agreement
Libcurl End User License Agreement
The MIT License Agreement
OpenSSL License Agreement
zlib End User License Agreement
Apache License Version 2.0, January 2004
Apache Software License, Version 1.1
Boost License
BladeSystem Onboard Administrator Software End User License Agreement
Expat License, Version 2.0
The Expat License, Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd
GNU General Public License, Version 3.0
GNU GENERAL PUBLIC LICENSE Version 2, June 1991
GNU LIBRARY GENERAL PUBLIC LICENSE Version 2, June 1991
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999
IPA Fonts License
JQuery License
Libmba Package License Agreement
LSI End User License Agreement
MOZILLA PUBLIC LICENSE Version 1.1
OpenLDAP Software End User License Agreement
OpenSSL License Agreement, Version 0.9.8
PHP License, Version 3.01
The PHP License, version 3.0
Python, v2.42
Sleepcat End User License Agreement Version 3.0
SSLeay End User License Agreement
Sun Microsystems Inc. Swing Graphical End User License Agreement
PNG Graphics File Format Software End User License Agreement
UEFI EDK2 License

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important:

The following devices (P212, P410, P410i, P411, P711m, P712m, and P812) are not supported with the HP ProLiant Smart Array Controller Driver and Firmware for VMware vSphere (i.e., Online ROM Flash Component - Smart Array P212, P410, P410i, P411, P711m, P712m, and P812) in SPP version 2015.10.0.  Customers will need to use the HP ProLiant Smart Array Controller Driver and Firmware for VMware vSphere in SPP version 2015.06.0.

Note: Products sold prior to the separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. on November 1, 2015, may have a product name and model number that differ from current models.

Notes:

For a specific list of firmware and software smart components included with this ISO, please see the HP Service Pack for ProLiant Release Notes or HP Service Pack for ProLiant Contents Report.

For firmware and driver support for specific hardware, go to the following URL: www.hp.com/support.

For more information regarding Remote Management - Lights Out Technology please visit Remote Management.

The HP USB Key Utility can be used to copy your Service Pack for ProLiant ISO onto your portable USB key storage device.  Please note that the latest version (2.0.0.0) of the utility is now 64-bit only.  If the 32-bit application is needed, please use version 1.8.0.0.  Earlier versions of the USB Key Utility will not work on an ISO image greater than 4GB.

Supported Devices and Features:

For supported hardware, see the HP Service Pack for ProLiant Server Support Guide.

The following devices (P212, P410, P410i, P411, P711m, P712m, and P812) are not supported with the HP ProLiant Smart Array Controller Driver and Firmware for VMware vSphere (i.e., Online ROM Flash Component - Smart Array P212, P410, P410i, P411, P711m, P712m, and P812) in SPP version 2015.10.0.  Customers will need to use the HP ProLiant Smart Array Controller Driver and Firmware for VMware vSphere in SPP version 2015.06.0.

Note: Products sold prior to the separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. on November 1, 2015, may have a product name and model number that differ from current models.

Version:2020.03.1 (31 Jul 2020)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

*REMOVED* - Version 2020.03.1 is NO LONGER AVAILABLE for download. Replacement version will be available soon. For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00102358en_us


Version:2020.03.0 (30 Mar 2020)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The 2020.03.0 SPP Production release contains components supporting the ProLiant and Apollo Gen9, Gen10 and Gen10 Plus server platforms and options. This SPP is a maintenance release containing Smart Update Manager (SUM) 8.5.0(A) and driver support for:

  • Red Hat Enterprise Linux 8.1
  • SUSE Linux Enterprise Server 12 SP5

2020.03.0 SPP release supersedes the 2019.12.0 SPP.

For a complete list of components on the ISO, see the SPP Contents Report on the ISO or the SPP page (documentation tab).


Version:2019.12.1 (31 Jul 2020)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

*REMOVED* - Version 2019.12.1 is NO LONGER AVAILABLE for download. Replacement version will be available soon. For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00102358en_us


Version:2019.12.0 (20 Dec 2019)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The 2019.12.0 SPP Production release contains components supporting the ProLiant and Apollo Gen9, Gen10 and Gen10 Plus server platforms and options. 

The 2019.12.0 SPP Production release provides support for:

  • Smart Update Manager 8.5.0
  • Online Firmware support for Red Hat Enterprise Linux 8.0

This SPP 2019.12.0 release supersedes the SPP 2019.09.0. 

For a complete list of components on the ISO, see the SPP Contents Report on the ISO or the SPP page (documentation tab).


Version:2019.09.0 (9 Sep 2019)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The 2019.09.0 SPP Production release contains components supporting the ProLiant and Apollo Gen9 and Gen10 server platforms and options.  For Synergy, please review the information at www.hpe.com/downloads/synergy.

The 2019.09.0 SPP Production release provides support for:

  • VMware ESXi 6.5 U3
  • VMware ESXi 6.7 U3, U2
  • Red Hat Enterprise Linux 8, 7.7
  • SUSE Linux Enterprise Server 15 SP1
  • Smart Update Manager 8.4.5

This SPP 2019.09.0 release supersedes the SPP 2019.03.1. 

For a complete list of components on the ISO, see the SPP Contents Report on the ISO or the SPP page (documentation tab).


Version:2019.03.1 (4 May 2019)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The 2019.03.1 SPP replaces 2019.03.0 and contains updated System ROM firmware to address an issue where the system may experience a higher rate of Uncorrectable Memory errors or boot time Memory training issues with Intel Xeon Scalable Performance Bronze and Silver processors. This issue was first introduced with System ROM version 2.00. HPE recommends that any customer experiencing a memory issue immediately update to this version of the system ROM before replacing any components. This issue is not unique to HPE servers.

The 2019.03.1 SPP Production release contains components supporting the ProLiant, Synergy and Apollo Gen9 and Gen10 server platforms and options.  For Synergy, please review the information at www.hpe.com/downloads/synergy.

The 2019.03.1 SPP Production release provides support for:

  • Smart Update Manager 8.4.0
  • Online updates for Gen9 servers running VMware ESXi 6.7 U1  
  • Red Hat Enterprise Linux 7.6
  • SUSE Linux Enterprise Server 12 SP4
  • VMware ESXi 6.7 U2

This SPP 2019.03.1 release supersedes the SPP 2018.11.0. 

For a complete list of components on the ISO, see the SPP Contents Report on the ISO or the SPP page (documentation tab).


Version:2018.11.0 (27 Nov 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This SPP Production release contains components supporting the ProLiant, Synergy and Apollo Gen9 and Gen10 server platforms and options.  For Synergy, please review the information at www.hpe.com/downloads/synergy. SPP Release Notes, Server Support Guide, OS Support Guide, as well as other release documentation can be found here.

The 2018.11.0 SPP Production release provides support for:

  • Microsoft Windows Server 2019 
  • Online updates for Gen10 servers running VMware ESXi 6.7 U1   
  • Smart Update Manager 8.3.7

SPP 2018.11.0 supersedes the 2018.09.0 SPP. 


Version:2018.09.0 (27 Sep 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This SPP Production release contains components supporting the ProLiant, Synergy and Apollo Gen9 and Gen10 server platforms and options.  SPP Release Notes, Server Support Guide, OS Support Guide, as well as other release documentation can be found here.

The 2018.09.0 SPP Production release provides support for:

  • Online updates for Gen10 servers running VMware ESXi 6.5 and VMware ESXi 6.0   
  • SUSE Linux Enterprise Server 15
  • Red Hat Enterprise Linux 6.10
  • Smart Update Manager v8.3.5

Note:  VMware ESXi 6.7 online updates are not yet supported on Gen 9 and Gen 10 servers due to an issue with the VMware Common Information Model (CIM) interface on VMware ESXi 6.7.   Advisory: VMware - Service Pack for ProLiant Version 2018.06.0 Does Not Support Online Updates On Any HPE ProLiant/Synergy Servers Running VMware ESXi 6.7 provides additional information.

SPP 2018.09.0 supersedes the 2018.06.0 SPP. 


Version:2018.06.0 (26 Jun 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The 2018.06.0 SPP Production release contains components supporting the ProLiant, Synergy and Apollo Gen9 and Gen10 server platforms and options.  SPP Release Notes, Server Support Guide, OS Support Guide, as well as other release documentation can be found here.

Added support for Red Hat Enterprise Linux 7.5 and vSphere 6.5 U2.

This SPP 2018.06.0 release supersedes the SPP 2018.03.0. 


Version:2018.03.0 (28 Feb 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The 2018.03.0 SPP Production release contains components supporting the ProLiant, Synergy and Apollo Gen9 and Gen10 server platforms and options.  SPP Release Notes, Server Support Guide, OS Support Guide, as well as other release documentation can be found here.


Version:2017.10.1 (31 Oct 2017)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

SPP 2017.10.1 is a replacement for SPP 2017.10.0 addressing these issues:

The 2017.10.1 SPP production release contains components supporting the ProLiant, Synergy and Apollo Gen9 and Gen10 server platforms and options.  It also adds support for the following operating systems:

  • Red Hat Enterprise Linux 7.4

  • SUSE Linux Enterprise Server 12 SP3

SPP Release Notes, Server Support Guide, OS Support Guide, as well as other release documentation can be found here.


Version:2017.07.2 (25 Sep 2017)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Due to a recently discovered Software/Firmware issue with the HPE QLogic NX2 10/20GbE Multifunction Drivers for VMware vSphere 6.0/6.5, version 2017.07.07(bnx2.vmware60@2017.07.07), HPE has chosen to withdraw the affected VMWare drivers from all deliverables that include them. 


Version:2017.04.0 (21 Apr 2017)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This release provides support for the following Linux operating systems:

  • Red Hat Enterprise Linux 6.9
  • Red Hat Enterprise Linux 7.3
  • SUSE Linux Enterprise Server 12 SP2

This is the last SPP to contain updates for the following operating systems:

  • Microsoft Windows Server 2008 and 2008 R2
  • Red Hat Enterprise Linux 6 32-bit
  • SUSE Linux Enterprise Server 11 32-bit

 See the Service Pack for ProLiant Release Notes for more information.  See the Service Pack for ProLiant Server Support Guide for information on supported HPE servers.


Version:2016.10.0 (24 Oct 2016)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This release adds support for:

  • Microsoft Windows Server 2016

  • Red Hat Enterprise 6.8

  • VMware vSphere 6.0 U2

  • Support for new options

  • HP Smart Update Manager v7.6.0

The SPP will not fit on standard DVD media.  See the Service Pack for ProLiant Release Notes for more information.  See the Service Pack for ProLiant Server Support Guide for information on supported HPE servers.


Version:2016.04.0 (1 Apr 2016)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Included in this release:

  • Support for new options

  • Support for Red Hat Enterprise Linux 7.2 and SUSE Linux Enterprise Server 12.1 

  • HP Smart Update Manager v7.5.1

The SPP will not fit on standard DVD media.  See the Service Pack for ProLiant Release Notes for more information.  See the Service Pack for ProLiant Server Support Guide for information on supported HPE servers.


Version:2015.10.0 (1 Oct 2015)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Included in this release:

  • Support for new options
  • HP Smart Update Manager v7.4.0

The SPP will not fit on standard DVD media.  See the HP Service Pack for ProLiant Release Notes for more information.

See the HP Service Pack for ProLiant Server Support Guide for information on supported HP servers.


Version:2015.06.0 (15 Jun 2015)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Included in this release:

  • Support for new HP ProLiant servers and options
  • Most VMware firmware components converted from scexe to zip
  • HP Smart Update Manager v7.3.0

The SPP may not fit on standard DVD media.  See the HP Service Pack for ProLiant Release Notes for more information.

See the HP Service Pack for ProLiant Server Support Guide for information on supported HP servers.


Version:2015.04.0 (9 Apr 2015)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Added support for:

  • New HP ProLiant servers and options

  • Red Had Enterprise Linux 6.6, SUSE Linux Enterprise Server 12, VMware vSphere 5.5 U2 and VMware vSphere 6.0

  • HP USB Key Utility for Windows v2.0.0.0 for downloads greater than 4GB

  • Select Linux firmware components available in rpm format

  • HP Smart Update Manager v7.2.0

With this release, the SPP may not fit on standard DVD media.  See the HP Service Pack for ProLiant Release Notes for more information.

See the HP Service Pack for ProLiant Server Support Guide for information on supported HP servers.


Version:2014.09.0 (9 Sep 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Release Summary:

  • Added new support for the following HP ProLiant servers:
    •   HP BL460c Gen9
    •   HP DL380 Gen9
    •   HP DL360 Gen9
    •   HP ML350 Gen9
    •   HP DL180 Gen9
    •   HP DL160 Gen9
    •   HP XL230a Gen9
  • Added support for new HP ProLiant options
  • Includes VMware driver support
  • Provides operating system support for Red Hat Enterprise Linux 7 and vSphere 5.5 U2
  • Contains HP Smart Update Manager v7.1.0
See the HP Service Pack for ProLiant Release Notes for more information.

See the HP Service Pack for ProLiant Server Support Guide for information on supported servers.  

Version:2014.06.0 (27 Jun 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

 The SPP was updated to address SSL/TLS MITM Vulnerability CVE-2014-0224 http://www.openssl.org/news/secadv_20140605.txt.

This SPP is intended for use with HP OneView 1.10 and other supported Solutions from HP.
Added support for:

  • HP FlexFabric 20Gb 2-port 630FLB Adapter
  • HP FlexFabric 20Gb 2-port 630M Adapter

Contains:

  • HP BladeSystem c-Class Virtual Connect Firmware, Ethernet plus 4/8Gb 20-port and 8Gb 24-port FC Edition Component v4.20(b)
  • HP Smart Update Manager v6.4.1

Version:2014.02.0(B) (25 Apr 2014)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Added new support for the HP ProLiant DL580 Gen8 Server
  • Enhanced support (processor update) for the following HP ProLiant servers:
    • HP DL380e Gen8 Server
    • HP DL360e Gen8 Server
    • HP BL420 Gen8 Server Blade
    • HP SL4540/SL4545 Gen8 Server
    • HP ML350e Gen8 V2 Server
  • Added operating system support for:
    • Microsoft Windows Server 2012 R2
    • Red Hat Enterprise Linux 5.10
    • Red Hat Enterprise Linux 6.5  
    • VMware ESXi 4.1 U2
    • VMware ESXi 5.0 U3
    • vSphere 5.1 U2
    • vSphere 5.5
  • Contains HP Smart Update Manager v6.2.0
  • Added Simplified Chinese language support
See the HP Service Pack for ProLiant Release Notes for more information.

See the HP Service Pack for ProLiant Server Support Guide for information on supported servers.

Version:2013.09.0(C) (30 Apr 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

See the HP Service Pack for ProLiant Release Notes for information about the issues resolved in this release.

  • Added new support for the following HP ProLiant servers:
    • HP ProLiant SL210t Gen8 Server
    • HP ProLiant ML310e Gen8 v2 Server
    • HP ProLiant MicroServer Gen8
    • HP ProLiant DL320e Gen8 v2 Server
    • HP ProLiant ML10 Server
    • HP ProLiant ML350e Gen8 v2 Server
  • Added support for new HP ProLiant options
  • Added operating system support for:
    • Red Hat Enterprise Linux 6.4
    • SUSE LINUX Enterprise Server 11 SP3
    • VMware ESXi 5.0 U2
    • VMware ESXi  5.1 U1
  • NIC drivers for Linux are now provided in binary rpm format; the location for the corresponding source rpm can be found in the rpm header file.
  • Contains HP Smart Update Manager v5.3.5


See the HP Service Pack for ProLiant Release Notes for more information.

See the HP Service Pack for ProLiant Server Support Guide for information on supported servers.


Version:2013.02.0(B) (2 Jul 2013)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

See the HP Service Pack for ProLiant Release Notes for information about the issues resolved in this release.

Release Summary:

  • Added support for new HP ProLiant options:
    • HP Ethernet 1Gb 4-port 366FLR Adapter
    • HP Ethernet 10Gb 2-port 560M Adapter
    • HP Ethernet 10Gb 2-port 560FLR SFP+ Adapter
    • HP Ethernet 10Gb 2-port 530T Adapter
  • Added operating system support for:
    • Red Hat Enterprise Linux 5.9
    • VMware ESXi  5.0 U2
    • Microsoft Windows Server 2012 for the following HP ProLiant G6 servers:
      • HP ProLiant BL460c G6 Server 
      • HP ProLiant DL380 G6 Server
      • HP ProLiant DL360 G6 Server
      • HP ProLiant ML350 G6 Server
  • Added online deployment of a select set of firmware components to systems running VMware ESXi 5.0 or VMware vSphere 5.1 including
    • HP ProLiant Gen 8 and G7 BIOS System ROMS
    • HP Integrated Lights-Out 3 and 4 
    • Smart Array Controllers – P2XX, P4XX, P8XX
    • Select Hard Disk Drives for HP ProLiant Gen 8 and G7 servers
  • Added a directory, named PXE, that contains information about PXE booting the SPP ISO and sample files
  • Updated to HP Smart Update Manager 5.3.5
    • Added ability to allow users to use root credentials to deploy firmware components and rpms to Linux systems when logged in with a user account
    • Performance improvement to Add New Target screen: Added Server / Operating System selections to the Target Type drop down list
    • Updated reports to include driver and agent information in addition to NIC /CNA/FC HBA driver and firmware information for Windows and Linux operating systems
    • Reduced memory usage and improved performance when generating repositories

Version:2012.10.0 (26 Oct 2012)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

See the HP Service Pack for ProLiant Release Notes for information about the issues resolved in this release.

HP Service Pack for ProLiant 2012.10.0

Release Summary:

  • Added support for Microsoft Windows Server 2012
  • Added offline support for HP Diagnostics and Array Configuration Utility (ACU)
  • Updated to HP Smart Update Manager 5.3.0
    • Added custom baseline functionality
    • Reports in comma-separated values (CSV) format
    • Scheduled web downloads to repository
See the HP Service Pack for ProLiant Release Notes for more information.

See the HP Service Pack for ProLiant Server Support Guide for information on supported servers.  

Version:2012.08.0 (4 Sep 2012)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

See the HP Service Pack for ProLiant Release Notes for information about the issues resolved in this release.

HP Service Pack for ProLiant 2012.08.0

Release Summary:

  • Added support for new HP ProLiant Gen8 servers and options
    • HP ProLiant BL660c Gen8 Server
    • HP ProLiant DL560 Gen8 Server
    • HP ProLiant DL320e Gen8 Server
    • HP ProLiant ML310e Gen8 Server
    • HP ProLiant WS460c Gen8 Server (offline firmware only)
    • HP Smart Array P721m Controller
    • HP Ethernet 10Gb 2-port 560SFP+ Adapter
  • Updated to HP Smart Update Manager 5.2.0
    •  UNC name for repositories on Microsoft Windows® systems
See the HP Service Pack for ProLiant Release Notes for more information.

See the HP Service Pack for ProLiant Server Support Guide for information on supported servers.  

Version:2012.06.0(B) (4 Jun 2012)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

See the HP Service Pack for ProLiant Release Notes for information about the issues resolved in this release.

HP Service Pack for ProLiant 2012.06.0

Release Summary:

  • Added support for new HP ProLiant Gen8 servers
    • HP ProLiant BL465c Gen8 Server 
    • HP ProLiant BL420c Gen8 Server
    • HP ProLiant DL385p Gen8 Server 
    • HP ProLiant DL380e Gen8 Server
    • HP ProLiant DL360e Gen8 Server 
    • HP ProLiant ML350e Gen8 Server 
  • Updated to HP Smart Update Manager 5.1.0
See the HP Service Pack for ProLiant Release Notes for more information.

See the HP Service Pack for ProLiant Server Support Guide for information on supported servers.  

Version:2012.02.0 (27 Mar 2012)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

See the HP Service Pack for ProLiant Release Notes, Known Limitations section, for more information about these resolved issues.

HP Service Pack for ProLiant 2012.02.0

Release Summary:

  • Added support for new HP ProLiant Gen 8 servers
    • HP ProLiant BL460c Gen8 Server
    • HP ProLiant DL380p Gen8 Server
    • HP ProLiant DL360p Gen8 Server
    • HP ProLiant DL160 Gen8 Server
    • HP ProLiant ML350p Gen8 Server
    • HP ProLiant SL250s Gen8 Server
    • HP ProLiant SL230s Gen8 Server 
  • Updated to HP Smart Update Manager 5.0.1
See the HP Service Pack for ProLiant Release Notes for more information.

Version:2012.01.0 (26 Jan 2012)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The following Known Limitations are resolved with the release of SPP 2012.01.0:

  • SPP DVD is not rebooting by itself when using Automatic Mode
  • Multiple component versions in the SPP
  • Duplicate component versions will be available for selection in HP SUM when deploying components to a system running Microsoft Windows Server 2008 R2
  • Multiple Emulex driver components are available for selection in HP SUM when deploying components to a system running Microsoft Windows Server 2008 R2
  • Readme.txt file, which is delivered in the SPP subset zip files, is missing information on SPP subsets

See the HP Service Pack for ProLiant Release Notes, Known Limitations section, for more information about these resolved issues.

HP Service Pack for ProLiant 2012.01.0

Release Summary:

  • Updated to HP Smart Update Manager 5.0.0
    • New graphical user interface
    • Online deployment of QLogic Fibre Channel HBA firmware
    • Ability to deploy firmware from Windows systems to Linux targets
    • Automatic discovery of iLOs and interconnects when given the Onboard Administrator, Virtual Connect, or server as a target
    • Vastly improved update speeds with minimal downtime when updating entire BladeSystem enclosures including Onboard Administrator and Virtual Connect
  • Contents report now available as contents.html in the root directory of the ISO
  • Key Components
    • HP BladeSystem c-class Virtual Connect Firmware for Windows and Linux version 3.50
    • HP Firmware Flash for QLogic Fibre Channel Host Bus Adapter for Windows and Linux version 2011.11.01 - contains online support

Version:2011.09.0 (3 Oct 2011)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

HP Service Pack for ProLiant 2011.09.0

Release Summary:

  • Initial release based on contents of HP ProLiant Support Packs for Windows and Linux version 8.70 and Smart Update Firmware DVD version 9.30
  • ML/DL/SL and BladeSystem Intel and AMD G6/G7 servers based System ROMs- Added Advanced Memory Error Detection Technology to improve prediction of non-recoverable memory events

Type:Application (Entitlement Required) - System Management
Version:2015.10.0(1 Oct 2015)
Operating System(s):
Microsoft Windows HPC Server 2008 R2
Microsoft Windows Server 2008 Foundation Edition
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 Foundation Edition
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Microsoft Windows Small Business Server 2011 Standard and Essentials
Red Hat Enterprise Linux 6 Server (x86)
Red Hat Enterprise Linux 6 Server (x86-64)
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 11 (x86)
SUSE Linux Enterprise Server 12
VMware ESXi 5.0
VMware vSphere 5.1
VMware vSphere 5.5
VMware vSphere 6.0

Description

HP Service Pack for ProLiant (SPP) is a comprehensive systems software and firmware update solution, which is delivered as a single ISO image. This solution uses HP Smart Update Manager (HP SUM) as the deployment tool and is tested on all HP ProLiant Gen9, Gen8 and earlier servers as defined in the Service Pack for ProLiant Server Support Guide found at www.hp.com/go/spp/documentation.

Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Included in this release:

  • Support for new options
  • HP Smart Update Manager v7.4.0

The SPP will not fit on standard DVD media.  See the HP Service Pack for ProLiant Release Notes for more information.

See the HP Service Pack for ProLiant Server Support Guide for information on supported HP servers.

Installation Instructions

Prerequisites:
For prerequisite information, please see the HP Service Pack for ProLiant Release Notes.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

573f8cc7d480479e263e5ee296314e7544ab1cd6953c8802ef31b67f519407c0SPP2015100.2015_0921.6.iso
f971fb44dab9c3c984e923c04202aba8b685f462ca8f89a05b046a52cebec51cSPP2015100.2015_0921.6.iso.md5sum

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.

Installation:

README replaces Start in online and offline modes.

Users familiar with using Start on the previous SPP iso will notice that it has been replaced with a new file, README. README.html will present locations for finding more information on the web and the basics of how to use the SPP in multiple languages.  End User License Agreements (EULA) are available in the EULA folder for viewing.

Installation instructions

There are two methods for using the Service Pack for ProLiant to update your ProLiant servers:

-    Online mode - Runs on a Windows or Linux hosted operating system
-    Offline mode - Server is booted to the ISO

  • Automatic mode - Firmware components will be updated without interaction

  • Interactive mode - Follow the onscreen steps to update firmware components

     To initiate deployment in Interactive mode:

    Run the launch_hpsum.bat (Windows) or launch_hpsum.sh (Linux) script, which is found in the root of the ISO.

    Automatic mode will by default run firmware update without any user interaction after sitting 30 seconds at the menu screen when an SPP ISO image is used to boot the server.

    Booting the SPP from iLO virtual media is only supported in Automatic Firmware Update mode. Users attempting this in any other mode may experience hangs from connection timeouts, difficulties updating iLO firmware, and mouse syncing issues.

    Note: If you install a software from the SPP and then install a Microsoft Windows operating system Service Pack or other operating system updates, HP recommends reinstalling the software from the SPP.

    Click here for theHP Service Pack for ProLiant Release Notes

Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement
BSD License
gSOAP Software End User License Agreement
Libcurl End User License Agreement
The MIT License Agreement
OpenSSL License Agreement
zlib End User License Agreement
Apache License Version 2.0, January 2004
Apache Software License, Version 1.1
Boost License
BladeSystem Onboard Administrator Software End User License Agreement
Expat License, Version 2.0
The Expat License, Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd
GNU General Public License, Version 3.0
GNU GENERAL PUBLIC LICENSE Version 2, June 1991
GNU LIBRARY GENERAL PUBLIC LICENSE Version 2, June 1991
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999
IPA Fonts License
JQuery License
Libmba Package License Agreement
LSI End User License Agreement
MOZILLA PUBLIC LICENSE Version 1.1
OpenLDAP Software End User License Agreement
OpenSSL License Agreement, Version 0.9.8
PHP License, Version 3.01
The PHP License, version 3.0
Python, v2.42
Sleepcat End User License Agreement Version 3.0
SSLeay End User License Agreement
Sun Microsystems Inc. Swing Graphical End User License Agreement
PNG Graphics File Format Software End User License Agreement
UEFI EDK2 License

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important:

The following devices (P212, P410, P410i, P411, P711m, P712m, and P812) are not supported with the HP ProLiant Smart Array Controller Driver and Firmware for VMware vSphere (i.e., Online ROM Flash Component - Smart Array P212, P410, P410i, P411, P711m, P712m, and P812) in SPP version 2015.10.0.  Customers will need to use the HP ProLiant Smart Array Controller Driver and Firmware for VMware vSphere in SPP version 2015.06.0.

Note: Products sold prior to the separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. on November 1, 2015, may have a product name and model number that differ from current models.

Notes:

For a specific list of firmware and software smart components included with this ISO, please see the HP Service Pack for ProLiant Release Notes or HP Service Pack for ProLiant Contents Report.

For firmware and driver support for specific hardware, go to the following URL: www.hp.com/support.

For more information regarding Remote Management - Lights Out Technology please visit Remote Management.

The HP USB Key Utility can be used to copy your Service Pack for ProLiant ISO onto your portable USB key storage device.  Please note that the latest version (2.0.0.0) of the utility is now 64-bit only.  If the 32-bit application is needed, please use version 1.8.0.0.  Earlier versions of the USB Key Utility will not work on an ISO image greater than 4GB.

Supported Devices and Features:

For supported hardware, see the HP Service Pack for ProLiant Server Support Guide.

Important

The following devices (P212, P410, P410i, P411, P711m, P712m, and P812) are not supported with the HP ProLiant Smart Array Controller Driver and Firmware for VMware vSphere (i.e., Online ROM Flash Component - Smart Array P212, P410, P410i, P411, P711m, P712m, and P812) in SPP version 2015.10.0.  Customers will need to use the HP ProLiant Smart Array Controller Driver and Firmware for VMware vSphere in SPP version 2015.06.0.

Note: Products sold prior to the separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. on November 1, 2015, may have a product name and model number that differ from current models.

Revision History

Version:2020.03.1 (31 Jul 2020)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

*REMOVED* - Version 2020.03.1 is NO LONGER AVAILABLE for download. Replacement version will be available soon. For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00102358en_us


Version:2020.03.0 (30 Mar 2020)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The 2020.03.0 SPP Production release contains components supporting the ProLiant and Apollo Gen9, Gen10 and Gen10 Plus server platforms and options. This SPP is a maintenance release containing Smart Update Manager (SUM) 8.5.0(A) and driver support for:

  • Red Hat Enterprise Linux 8.1
  • SUSE Linux Enterprise Server 12 SP5

2020.03.0 SPP release supersedes the 2019.12.0 SPP.

For a complete list of components on the ISO, see the SPP Contents Report on the ISO or the SPP page (documentation tab).


Version:2019.12.1 (31 Jul 2020)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

*REMOVED* - Version 2019.12.1 is NO LONGER AVAILABLE for download. Replacement version will be available soon. For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00102358en_us


Version:2019.12.0 (20 Dec 2019)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The 2019.12.0 SPP Production release contains components supporting the ProLiant and Apollo Gen9, Gen10 and Gen10 Plus server platforms and options. 

The 2019.12.0 SPP Production release provides support for:

  • Smart Update Manager 8.5.0
  • Online Firmware support for Red Hat Enterprise Linux 8.0

This SPP 2019.12.0 release supersedes the SPP 2019.09.0. 

For a complete list of components on the ISO, see the SPP Contents Report on the ISO or the SPP page (documentation tab).


Version:2019.09.0 (9 Sep 2019)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The 2019.09.0 SPP Production release contains components supporting the ProLiant and Apollo Gen9 and Gen10 server platforms and options.  For Synergy, please review the information at www.hpe.com/downloads/synergy.

The 2019.09.0 SPP Production release provides support for:

  • VMware ESXi 6.5 U3
  • VMware ESXi 6.7 U3, U2
  • Red Hat Enterprise Linux 8, 7.7
  • SUSE Linux Enterprise Server 15 SP1
  • Smart Update Manager 8.4.5

This SPP 2019.09.0 release supersedes the SPP 2019.03.1. 

For a complete list of components on the ISO, see the SPP Contents Report on the ISO or the SPP page (documentation tab).


Version:2019.03.1 (4 May 2019)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The 2019.03.1 SPP replaces 2019.03.0 and contains updated System ROM firmware to address an issue where the system may experience a higher rate of Uncorrectable Memory errors or boot time Memory training issues with Intel Xeon Scalable Performance Bronze and Silver processors. This issue was first introduced with System ROM version 2.00. HPE recommends that any customer experiencing a memory issue immediately update to this version of the system ROM before replacing any components. This issue is not unique to HPE servers.

The 2019.03.1 SPP Production release contains components supporting the ProLiant, Synergy and Apollo Gen9 and Gen10 server platforms and options.  For Synergy, please review the information at www.hpe.com/downloads/synergy.

The 2019.03.1 SPP Production release provides support for:

  • Smart Update Manager 8.4.0
  • Online updates for Gen9 servers running VMware ESXi 6.7 U1  
  • Red Hat Enterprise Linux 7.6
  • SUSE Linux Enterprise Server 12 SP4
  • VMware ESXi 6.7 U2

This SPP 2019.03.1 release supersedes the SPP 2018.11.0. 

For a complete list of components on the ISO, see the SPP Contents Report on the ISO or the SPP page (documentation tab).


Version:2018.11.0 (27 Nov 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This SPP Production release contains components supporting the ProLiant, Synergy and Apollo Gen9 and Gen10 server platforms and options.  For Synergy, please review the information at www.hpe.com/downloads/synergy. SPP Release Notes, Server Support Guide, OS Support Guide, as well as other release documentation can be found here.

The 2018.11.0 SPP Production release provides support for:

  • Microsoft Windows Server 2019 
  • Online updates for Gen10 servers running VMware ESXi 6.7 U1   
  • Smart Update Manager 8.3.7

SPP 2018.11.0 supersedes the 2018.09.0 SPP. 


Version:2018.09.0 (27 Sep 2018)
Источник: [https://torrent-igruha.org/3551-portal.html]
.

How to Download and Install Windows 7 8 Drivers

2015 complete drivers pack download windows 7